Showing 17–32 of 95 results
-
30,00 €
- 40 G data rate via 4 × ~11.3 Gb/s lanes
- Up to 100 m reach on OM3, 150 m on OM4 multimode fiber
- MPO-12 fiber connector (MTP male)
- Hot-pluggable QSFP+ form factor
- Power consumption under 1.5 W, highly energy-efficient
- Includes 850 nm VCSEL transmitters and PIN receivers
- Supports I²C-based digital diagnostics (DDM/DOM)
- Operates with a single 3.3 V supply at 0–70 °C
- Fully compliant with QSFP+ MSA and IEEE 802.3ba (40GBASE-SR4)
-
204,00 €
- 41.2 Gbps via 4×10 Gb/s SWDM VCSEL lanes
- Supports distances up to 240 m (OM3), 350 m (OM4), 440 m (OM5)
- Duplex LC multimode fiber interface
- Hot-pluggable QSFP+ form factor
- Low power consumption: < 3.5 W
- Operational over 0–70 °C
- Real-time diagnostics (DDM/DOM) with I²C interface
- Compliant with QSFP+ MSA, SWDM MSA, SFF-8636, IEEE 802.3ba, RoHS, and Class 1 Laser Safety
-
148,00 €
- 100G data rate via 4 × 25 Gb/s LAN-WDM lanes
- Up to 10 km reach over single-mode fiber (1310 nm)
- Duplex LC connector for SMF interface
- Hot-pluggable QSFP28 form factor
- Low power consumption (< 4 W)
- Built-in digital diagnostics (DDM/DOM)
- Internal CDR (clock & data recovery) on both Tx and Rx channels
- Compliant with QSFP28 MSA and IEEE 802.3ba 100GBASE-LR4 standards
- Operating temperature range: 0–70 °C
-
35,00 €
- 100G data rate with 4×25G NRZ lanes
- Up to 70 m on OM3, 100 m on OM4 fiber
- MPO-12 multimode fiber connector
- Hot-pluggable QSFP28 form factor
- Low power consumption <2.5 W
- Digital diagnostics (DDM/DOM) support
- IEEE 802.3bm and QSFP28 MSA compliant
- Operating temperature 0–70 °C
-
1.224,00 €
- 100G data rate via 4 × LAN-WDM lanes (~27.95 Gb/s each)
- Extended reach up to 40 km over single-mode fiber (1310 nm)
- Duplex LC interface for SMF connection
- Hot-pluggable QSFP28 form factor
- Low power consumption (< 5.5 W)
- Real-time monitoring with DDM/DOM support
- Built-in TX and RX clock/data recovery (CDR)
- Fully compliant with QSFP28 MSA, IEEE 802.3ba 100GBASE-ER4, and OTU4/ITU-T G.959.1 standards
- Operating temperature range: 0 – 70 °C (case), storage: –20 – 85 °C
-
1.836,00 €
- 100 G data rate via 4 × ~27.95 Gb/s LAN-WDM lanes
- Up to 80 km reach over single-mode fiber (1310 nm)
- Duplex LC connector for SMF interface
- Hot-pluggable QSFP28 form factor
- Low power consumption (< 6 W)
- Built-in digital diagnostics (DDM/DOM)
- Integrated TX and RX CDR (Clock & Data Recovery)
- RoHS-compliant, eco-friendly design
- Operating temperature: 0 – 70 °C
-
459,00 €
- 100G data rate via 4 × ~25 Gb/s SWDM lanes (850–940 nm), total 103.1 Gbps
- Up to 75 m (OM3), 100 m (OM4), or 150 m (OM5) reach over MMF
- Duplex LC multimode fiber connector
- Hot-pluggable QSFP28 form factor for easy installation
- Low power consumption (~3.5 W maximum)
- Real-time diagnostics (DDM/DOM) via I²C
- Compliant with QSFP28 MSA, SWDM MSA, and IEEE 802.3bm standards
- CAUI-4 electrical interface, Eco-friendly RoHS compliance
- Operating case temperature: 0–70 °C
-
306,00 €
- 100 G data rate via 2 × 53.125 Gb/s PAM4 bidirectional lanes
- Reach up to 100 m on OM4, 70 m on OM3 multimode fiber
- Duplex LC connector for MMF interface
- Hot-pluggable QSFP28 form factor
- Low power consumption (< 4 W)
- Integrated KP4 FEC for enhanced signal integrity
- Built-in digital diagnostics (DDM/DOM) via I²C
- Compliant with QSFP28 MSA and IEEE 802.3cm-2020 standards
- Operating temperature range: 0 – 70 °C
-
102,00 €
Transmission Distance: 70m (OM3 MMF), 100m (OM4/OM5 MMF)
Connector Type: MPO-12
Wavelength: 850nm
Power Consumption: ≤4.5W, highly energy-efficient
Technology: 850nm VCSEL array + PIN photodetectors
Diagnostics: Real-time DDM/DOM monitoring via I²C interface
Error Correction: PAM4 DSP enhances data integrity
Compliance: QSFP56 MSA, IEEE 802.3cd 200GBASE-SR4, RoHS
-
2.455,00 € – 2.521,00 €Price range: 2.455,00 € through 2.521,00 €
- Compliant with OSFP MSA and CMIS5.2
- Support 8x224G (PAM4) electrical data rates
- Enables 1600Gb/s transmission
- Link length up to 2.5m (32AWG)
- Single +3.3V power supply
- Operation case temperature: 0 to 70°C
- RoHS compliant
-
87,00 €
- 100 G data rate using 4×25 Gb/s CWDM lanes (1270/1290/1310/1330 nm)
- Up to 2 km reach over single-mode fiber (SMF)
- Duplex LC connector for SMF interface
- Hot-pluggable QSFP28 form factor
- Low power consumption (<3.5 W)
- Real-time monitoring with built-in digital diagnostics (DDM/DOM)
- Compliant with QSFP28 MSA and 100G CWDM4 MSA standards
- Operating temperature: 0 – 70 °C
-
153,00 €
- 100 G data rate via 4×25.781 Gb/s CAUI-4 (PAM4) lanes
- Up to 500 m reach over single-mode fiber (1310 nm)
- Duplex LC connector for SMF interface
- Hot-pluggable QSFP28 form factor
- Low power consumption (< 4 W)
- Real-time monitoring with DDM/DOM support
- Compliant with QSFP28 MSA and IEEE 802.3cu (100GBASE-DR1) standards
- Operating temperature range: 0–70 °C
-
127,00 €
- 100 G data rate via 4 × 25.78 G lanes (PAM4)
- Up to 2 km reach over single-mode fiber (1310 nm)
- MPO-12 multimode connector (SMF interface)
- Hot-pluggable QSFP28 form factor
- Low power consumption (< 3.5 W)
- Real-time monitoring via digital diagnostics (DDM/DOM)
- Compliant with QSFP MSA, SFF-8436, SFF-8636, and PSM4 MSA
- Commercial temp range 0 – 70 °C
-
544,00 € – 833,00 €Price range: 544,00 € through 833,00 €
- Support 4x56G (PAM4) electrical data rates
- Link length up to 8m (30AWG)
- Typical power consumption 3.5 W typical per end
- Single +3.3 V supply, BER(Post-FEC ) < 10⁻¹⁵
- Hot pluggable and I2C management interface
- Compliant with QSFP MSA, SFF-8636 and RoHS
- Operating case temperature range: 0 to +70ºC
-
595,00 €
- 400G data rate with 4×100G PAM4 lanes
- Up to 500 m reach over SMF
- MPO-12 fiber connector
- Hot-pluggable OSFP form factor
- Low power consumption <10 W
- Digital diagnostics (DDM/DOM) support
- Compliant with IEEE 802.3bs and OSFP MSA
- Operating temperature 0–70 °C
-
959,00 €
- 400G data rate via 8 bidirectional PAM4 lanes (850 nm & 908 nm)
- Up to 70 m on OM3, 150 m on OM5 multimode fiber
- BiDi design over MPO-12 for simplified fiber cabling
- Hot-swappable QSFP-DD module
- Low power usage (<12 W) with DSP-driven efficiency
- Real-time diagnostics (DDM/DOM) included
- Compliant with QSFP-DD MSA, 400GAUI-8/PAM4, IEEE 802.3 standards
- Commercial 0–70 °C operating range
