WiFi 7 (802.11be) Access Point – Tri-Band Indoor Ceiling Mount | OpenWiFi Compatible
$249.00
Experience next-gen wireless speed and flexibility with our Tri-Band WiFi 7 Access Point. Supports OpenWiFi for customizable network performance in enterprise and industrial environments.
- Tri-band operation (2.4GHz / 5GHz / 6GHz)
- 9 Gbps max throughput
- PoE++ (802.3bt) and 10GbE SFP+ uplink
- WPA3 + MPSK enhanced security
- OpenWiFi support for open-source flexibility
Note: Prices are exclusive of customs duties, import taxes, and VAT. Any additional charges imposed by your country are the buyer's responsibility.
Enhance your enterprise connectivity to the next level with Indoor WiFi 7 Access Point, designed for ultra-high-speed wireless performance, seamless roaming, and open network connectivity. It is designed for demanding environments, such as smart offices, VR/AR laboratories, stadiums, and industrial IoT. This access point can provide up to 9 Gbps total throughput with the latest 802.11be (WiFi 7) standard.
Based on the Qualcomm IPQ5322 platform, this tri-band unit operates across 2.4GHz, 5GHz, and 6GHz frequencies. It supports 320 MHz channel width, Multi-Link Operation (MLO), MU-MIMO, and 4096QAM modulation. This ensures low latency and high data rates even in dense client scenarios.
Compatibility with OpenWiFi makes this AP ideal for customizable deployments and centralized controller-based management.
Ethernet Ports | 1x10/100/1000/2500Mbps Ethernet port(PoE input) 1x10/100/1000/2500Mbps Ethernet port 1x10Gbps SFP+ port | ||
Console Port | 1xRJ45 | ||
AP Chip | Qualcomm IPQ5322 | ||
Wireless Standards | 802.11a/b/g/n/ac/ax/be | ||
Frequency Band | 2.4 GHz | 5 GHz | 6 GHz | ||
Transmission Rate | 9000Mpbs | ||
Peak Data Rate | 2.4GHz: 688Mbps | 5GHz: 2882Mbps | 6GHz: 5764Mbps | ||
Antenna Type | 2x2 2.4G antenna | 2x2 5GHz antenna | 2x2 6GHz antenna | ||
Antenna gain | 4dBi | ||
Max. Access Client Number | 1024 | ||
Recommended Access Clients | 100 | ||
Power Method | PoE | Mount Type | Ceiling |
Max Power Consumption | 36Watt | Input Power | 802.3bt Power over Ethernet | 12V 3A DC |
Dimension | 208x208x46mm | Weight | 0.55KG |
Op.Temperature | -20 - 55℃(-4 to 131°F) | Op. Humidity | 5% - 95%(non-condensing) |
WLAN
Technologies: MU-MIMO, OFDMA, TWT
Max Clients: 1024
Recommended Clients: 100
Virtual APs: Up to 16
Forwarding Mode: Direct / Tunnel
Features: SSID Hiding, Low-rate Client Limitation, Air Time Fairness (ATF)
Network
IP Assignment: Static IP, DHCP
Protocols: DHCP, VLAN, LLDP, PPPoE Client
Services: NAT, ACL, NTP
Advanced: VXLAN, Dynamic VLAN, Multicast-to-Unicast
Security
Encryption: WPA/WPA2/WPA3 (PSK, Enterprise, MPSK)
Authentication: Built-in Portal, External Portal, or RADIUS Client
Management
Features: NTP, Remote Packet Capture, ZTP, Network Telemetry, Location Report
Device Management: SSH, Web, Syslog, Asteria Campus Controller
Roaming
Standards: 802.11k/v/r
Smart Roaming: Signal Threshold Configurable, Sticky Client Prevention
Quality of Service (QoS)
Controls: SSID-based Rate Limit, Port-based DSCP, DNS-based DSCP
WMM (802.11e): Supported
Client Isolation
VLAN-based Isolation: Supported
SSID-based Isolation: Supported
Radio Management
Features: DFS, TPC
Reviews
There are no reviews yet.