/
800G OSFP Passive Direct Attach Cable
This cable connects two OSFP ports directly at 800Gbps aggregate. Each connector carries eight lanes in each direction, for 16 differential pairs per end (eight transmit, eight receive). Each lane operates at 53.125 GBd with PAM4 modulation, carrying 50 or 100Gb/s, in accordance with IEEE P802.3ck.
Both ends use the OSFP housing with a close top heat sink (CTHS, finned top). Each connector contains an EEPROM accessible over I2C, so product information can be read or written per port. The cable is available in three lengths: 0.5m and 1m use 30AWG wire, and 2m uses 26AWG or 25AWG wire. Operating case temperature range is 0°C to 70°C; storage temperature range is -20°C to 85°C. Operating humidity is rated 5% to 85% RH, and up to 95% RH non-condensing as an absolute maximum. The cable complies with OSFP MSA and IEEE P802.3ck, and is RoHS compliant.
CERTIFICATE |
|
|
|
|
SCOPE | Quality management system | Environmental management | Occupational health and safety | US radio frequency compliance |