400G QSFP112 VR4 50m OM4 MPO12/APC

SKU:

<9 W | VCSEL | 50m | MMF

  • 400G data rate with 4×106.25G PAM4 lanes

  • Reach up to 50m on OM4 MMF

  • MPO-12 multimode fiber interface

  • Hot-pluggable QSFP112 form factor

  • Low power consumption <9 W

  • Supports DDM/DOM and FEC

  • Operating temperature 0–70 °C

  • Compliant with IEEE 802.db and IEEE 802.ck

  • Compliant with QSFP112 MSA and RoHS

Request Discount

The 400G QSFP112 VR4 optical transceiver delivers a 400Gbps data rate over OM4 multimode fiber up to 50m (30m on OM3), purpose-built for very-short-reach intra-data-center links, top-of-rack to spine connections, and 5G telecom transport. Using 4 lanes of 106.25Gbps PAM4 (53.125 GBd per lane) with 850nm VCSEL transmitters and PIN receivers, the module aggregates to 425Gbps of raw signaling capacity through a single MPO-12 APC receptacle, with internal CDR circuits on both the transmit and receive paths to maintain signal integrity.

The module is fully compliant with QSFP112 MSA and manages link health via CMIS 5.0 (or later) over a 2-wire serial interface, with built-in digital diagnostic monitoring covering temperature, supply voltage, and per-lane Tx/Rx optical power. It's compliant with IEEE 802.3db and IEEE 802.3ck, and RoHS certified for lead-free deployment.

Form FactorQSFP112
ConnectorMPO12 APC
MediaMMF
Max. Cable Distance30m(OM3) | 50m(OM4)
Data Rate425Gbps
Power Consumption (Max)9W
Transmitter TypeVCSEL
Receiver TypePIN
Extinction Ratio2.5dB
DDM/DOMSupported
DSPTX and RX
CDR(Clock and Data Recovery)TX and RX
Op. Temperature0 to 70°C (32 to 158°F)
Humidity(non-condensing)5-85%
Application400G Ethernet
ProtocolsQSFP112 MSA, IEEE802.db, IEEE802.ck, CMIS

CERTIFICATE

ISO 9001ISO 9001

ISO 14001ISO 14001

ISO 45001ISO 45001

FCCFCC

SCOPE

Quality management system

Environmental management

Occupational health and safety

US radio frequency compliance