/
400G QSFP112 to OSFP-RHS Active Optical Cable
This cable connects a QSFP112 port to an OSFP-RHS port over multimode fiber, carrying 400Gb/s Ethernet between the two ends. Each connector contains a 4-channel 850nm VCSEL array, a 4-channel PIN photodetector array, a 4-channel driver and TIA, and a DSP. Each of the four lanes runs at 106.25Gb/s with PAM4 modulation (53.125 GBd), in line with IEEE 802.3db 400GBASE-VR4.
Maximum link length is 30m on OM3 multimode fiber and 50m on OM4 multimode fiber, with FEC enabled. Standard cable lengths are 1m, 5m, 7m, 20m, 30m and 50m. Power dissipation is 7.5W typical and 8W maximum, drawn from a single 3.3V supply (3.13V to 3.47V). Operating case temperature range is 0°C to 70°C, and storage temperature range is -20°C to 85°C. Operating humidity is rated 5% to 85% RH.
Digital diagnostics are available through the CMIS 4.0 management interface, covering case temperature, supply voltage, and per-channel transmit power, receive power and bias current. The QSFP112 end complies with QSFP112 MSA, and the OSFP-RHS end complies with OSFP MSA. The OSFP-RHS end uses the flat-top (Riding Heat Sink) housing.
CERTIFICATE |
|
|
|
|
SCOPE | Quality management system | Environmental management | Occupational health and safety | US radio frequency compliance |