400G QSFP112 Active Optical Cable

SKU:

<8W | QSFP112 to QSFP112 | 50m

  • Hot-pluggable QSFP112 form factor

  • Transmission data rate up to 106.25G per channel

  • 4x106.25Gbps PAM4 transmitter and PAM4 receiver

  • 4 channels 850nm VCSEL array

  • 4 channels PIN photo detector array

  • Power consumption <8W

  • Compliant to QSFP112 MSA and CMIS4.0

  • Built-in digital diagnostic functions

Request Discount

This cable connects two QSFP112 ports over multimode fiber, carrying 400Gb/s Ethernet between them. An optical transceiver is built into each connector, with a 4-channel 850nm VCSEL array and a 4-channel PIN photodetector array. Each of the four lanes runs at 106.25Gb/s with PAM4 modulation (53.125 GBd), in line with IEEE 802.3db.

Maximum link length is 30m on OM3 multimode fiber and 50m on OM4 multimode fiber, with FEC. Power dissipation is 7.5W typical and 8W maximum, drawn from a single 3.3V supply (3.13V to 3.47V). Operating case temperature range is 0°C to 70°C, and storage temperature range is -20°C to 85°C. Operating humidity is rated 5% to 85% RH.

The cable complies with the QSFP112 MSA and is managed through CMIS 4.0. Built-in digital diagnostics report case temperature and supply voltage, together with transmit power, receive power and bias current for each channel.

Connector TypeQSFP112
Cable TypeOM3 | OM4
MediaMMF
Max. Cable Distance30m(OM3) | 50m(OM4)
Data Rate400Gbps
Wavelengths Range850nm
Transmitter TypeVCSEL
Receiver TypePIN
Extinction Ratio>2.5dB
Supply Voltage3.3V
DDMSupported
Power Consumption (Max)8W
Op. Temperature0 to 70°C (32 to 158°F)
ProtocolsIEEE802.3db, 400GBASE-VR4 Ethernet(PAM4)

CERTIFICATE

ISO 9001ISO 9001

ISO 14001ISO 14001

ISO 45001ISO 45001

FCCFCC

SCOPE

Quality management system

Environmental management

Occupational health and safety

US radio frequency compliance